Start your EVOTECH request in under a minute.
TV Hanging Technician Jobs in Richmond, TX 77406
This board will send you from a finished living room in an established subdivision to a metal workshop on five acres without ever leaving the ZIP code. EVOTECH IT LLC wants hanging technicians who can fix into a steel girt as confidently as into a stud wall, and who are not thrown by a gate, a gravel drive and no signal on the phone.
One ZIP code, two completely different kinds of address
77406 spreads north and west of the river and never settles into a single pattern. Established subdivisions along the FM 359 and FM 1093 corridors sit beside tracts of open land carrying a house, a barn and a workshop, and both of them land on the same route sheet.
That is the reason we recruit separately for this ZIP. Somebody who only works finished interiors will lose half a day on an acreage call, and somebody who only works shops will make a mess of a customer’s formal living room. We are looking for people who can switch between the two without changing their standard.
It also changes the shape of the day. Stops are further apart here than anywhere else we cover, so we schedule fewer of them and expect each one finished properly rather than rushed to squeeze in a fourth.
Mounting inside a steel shop is not the same trade as mounting in a house
Workshops, equipment barns and the growing number of barn-style homes out here are framed in red iron with purlins and girts, then clad in thin ribbed sheeting. That sheeting will carry a picture frame. It will not carry a television, and fixing a mount to it is the single most common piece of work we are called out to undo on this route.
- Find the steel. Girts run horizontally across the wall frame at fairly predictable spacing. A magnet and a careful probe locate them faster than reading the screw lines from outside and hoping.
- Spread the load. Where a bracket will not line up on two members, span them with strut or a plywood backer fixed properly to the steel, then mount to that.
- Use the right fastener. Self-drilling structural screws rated for the gauge you are going into, not whatever came in the box with the mount.
- Respect the insulation. Vinyl-faced blanket tears easily and it is doing a vapour-barrier job. Cut it cleanly and close what you opened.
Condensation is the other thing to plan around. An uninsulated building sweats, so cable should not be left lying against cold steel and connections belong somewhere they can dry out.
Covered porches, outdoor kitchens and what the heat does to them
Covered patios and outdoor kitchens are ordinary requests on this route, and a large share of them arrive with an indoor television already in the box.
Say so plainly before it goes up. A standard panel under a porch roof lives in high humidity, swings through a wide temperature range in a single day and draws insects into its vents. An outdoor-rated display is built for that and an indoor one is not. The customer may want it hung anyway, which is their call, but it should be an informed one.
The rest of an outdoor mount is corrosion and water management. Stainless or properly coated hardware, a drip loop ahead of every connector, cable rated for sunlight wherever it is exposed, and an arm that will still articulate in two years. Check behind any existing panel for wasp and dirt-dauber nests before you put a hand in there, and look at where the afternoon sun actually lands before you fix the position. A screen that is unwatchable from four o’clock onward generates a callback even when it is perfectly level.
Inside the established neighbourhoods off FM 359
The subdivision half of this ZIP is largely eighties and nineties construction on slabs, with mature trees over the streets and interiors that have been through at least one remodel.
Expect full-height brick fireplaces in the den, formal rooms being converted into offices and media spaces, and low-voltage cable that has been added to by two or three different people over the years. The wall plate you find is not always connected to what the label on it says, so test before you build a plan around it.
Attic work in these houses is simple in geometry and brutal in summer temperature. Go up early in the day where the schedule allows, carry water with you, and do not push through heat symptoms to save a second trip. A technician who comes down and reschedules a cable run is a far better outcome for everybody than one who puts a boot through a ceiling.
Long drives, gates, dogs and no bars on the phone
Reaching the wall is its own skill out here, and it is worth thinking through before you accept a rural day.
- Gates. Plenty of properties have a keypad or a chain at the road. Get the code with the appointment, and if you open a gate on land with animals behind it, close it behind you.
- Drives. Long gravel approaches with nowhere obvious to turn a vehicle around. Look before you commit, and park where you can leave without reversing a quarter of a mile.
- Dogs. Working dogs on acreage are a different proposition from a family pet. Ask the customer to secure them and wait until that has actually happened.
- Signal. Coverage thins once you are off the main roads. Download the ticket, the address and anything you need before you leave pavement, and agree a call-in time so nobody is guessing where you are.
What you carry when the trade counter is thirty minutes away
There is no supply house five minutes down the road on most of this route, so the vehicle has to be the store. The table below is what technicians here find they genuinely reach for.
| What you carry | What it is for | What goes wrong without it |
|---|---|---|
| Self-drilling structural screws in several gauges | Fixing into steel girts and purlins | General-purpose sheet-metal screws strip out under a loaded arm |
| Strut, angle or plywood backers | Spanning two members when the bracket will not line up | Cutting the bracket to fit is not a fix, it is a failure waiting |
| Hammer drill, fresh masonry bits, sleeve anchors | Full-height brick and stone chimney breasts | A worn bit turns a mortar joint into a crater |
| Stainless hardware and sunlight-rated cable | Covered patios and outdoor kitchens | Plated parts stain, then seize, and the customer sees both |
| Fish tape, glow rods and a long auger bit | Concealed runs with no obvious path | Surface trunking becomes your default instead of the customer’s choice |
| Ladders plus a stable work platform | Tall dens, shop walls and covered porches | Standing on the top step is an automatic stand-down |
Requirements, screening and how work reaches you
EVOTECH IT LLC carries a low-voltage licence, full insurance, two decades of trading and a five-star rating, with a territory running from Cypress and Katy across to Sugar Land, Richmond and Fulshear. Work on this route goes to independent technicians who hold their own general liability cover, complete a W-9, pass background screening and arrive with a vehicle and tools that suit the ground described above.
We are less interested in a long résumé than in specifics. The heaviest panel you have set on your own. What you would fix a full-motion arm to inside a metal workshop. How you would talk a customer out of a mount position that is not going to work for them.
What the work pays is worked out when we meet, against the range of jobs you are willing to cover and what you have already done. Reach us on (832) 359-2425, or leave a note on the contact form, and say which end of this ZIP suits you better.
Related services
Frequently asked questions
All my experience is residential, none of it in steel buildings. Am I out?
How far apart are appointments on this route?
Are workshop and barn installs treated differently from house calls?
Do I need to be comfortable around livestock and loose dogs?
Is there a height limit on what you will ask me to do?
Can I take on network cabling as well as mounting?
What happens if I arrive and cannot get onto the property?
Happy in a living room and inside a steel workshop?
That is a rare combination and it is exactly what this route needs. Phone (832) 359-2425, or introduce yourself on the contact form.
Start Your Application
Ready for EVOTECH to help?
Before you leave, send the quick version. We will review the page you came from and reply with the clean next step.